Skip to main content

25602 Vacuum Detection/Moisture Alarm PCB set

$ AUD295.90
(Inc. GST)
$ AUD269.00
(Ex. GST)
Write a Review
SKU:
25602
Weight:
0.10 KGS
Adding to cart… The item has been added

Vacuum Detection/Moisture Alarm PCB set (incl. on/off switch and mount, buzzer, moisture sensor, CR2032 battery holder and 4 colour LED; 2pcs Panasonic CR2032 batteries incl.)

Nauticam's comprehensive vacuum system allows the underwater photographer to confirm watertight integrity before entering the water. This system provides additional peace of mind with expensive camera equipment and should mean fewer lost dives due to minor equipment issues. The system is comprised of two parts, a one way vacuum valve and an electronic monitoring circuit.

MONITORING CIRCUIT

The electronic monitoring circuit is compactly integrated into the housing’s leak detector, where it constantly measures the vacuum level and reports its status via a multi-color LED easily visible on the rear of the housing. This sophisticated circuit has an advanced temperature compensation capability, so changes in ambient temperature or changes in internal temperature won’t cause a false positive.

Starting with NA-70D for Canon 70D, all new Nauticam DSLR and Mirrorless Interchangeable Lens Camera housing models will ship with the electronic monitoring circuit installed as standard equipment. Vacuum valves are sold as optional equipment, allowing the user to customize the housing accessory configuration as needed. Understanding the LED color codes is very easy. At ambient pressure, the LED slowly blinks blue. When a solid vacuum is achieved, the LED changes to a solid green, indicating system integrity. If the vacuum starts to degrade, the LED begins to flash yellow, and if water intrusion is detected, the LED flashes red, and the audible alarm is sounded.

VACUUM VALVE

The second component of this system is a one way vacuum valve, which is available in several styles to support various housing configurations. These Vacuum Valves contain an integrated vacuum release, and a redundant waterproof cap. No tools are required to open the housing after creating a vacuum, as the vacuum is released with a simple knurled nut. 

The basic valve uses a hand pump to create the vacuum, but a more advanced Dual Activation vacuum valve is also available. The Dual Activation Valve accepts a BCD Low Pressure Inflator Hose quick disconnect, and uses tank pressure to create a Venturi effect that pulls the vacuum. This is recommended for housings like Nauticam’s DCES for RED EPIC and SCARLET where the internal volume of the housing makes using a hand pump impractical.

“Offset” Extension Valves are used when a housing has a single accessory hole, but requires both a Vacuum Valve and electrical bulkhead to be installed in the same location. This will enable most housings to be able to utilize this valuable tool.

All vacuum valves also include a hand pump and spanner tool for installing valves.

THE BOTTOM LINE

This system is the most advanced integrity check system available today, and the only one with integrated leak detection and temperature compensation. With it’s intuitive multi-colored LED status codes, the underwater photographer can now be assured with a simple glance that the watertight integrity of the housing is secure.

Compatible with the following housings

16110 NA-RT7 Housing 
16112 NA-RT4.7 Housing for REDTouch 4.7 LCD Monitor with Monitor Shade
16501 NA-BMPCCII Housing for Blackmagic Pocket Cinema Camera 5K
17153 NA-GFX50S Housing
17154 Fujifilm X-H1 Housing
17155 NA-XT3 Housing for Fujifilm X-T3 Camera
17217 NA-D750 housing for Nikon D750 Camera
17218 NA-D7200 housing for Nikon D7200/D7100 Camera
17219 NA-D5 Housing
17220 NA-D500 Housing 
17221 NA-D7500 Housing for Nikon D7500 Camera
17222 NA-D850 Housing for Nikon D850 Camera
17223 NA-Z7 Housing for Nikon Z7 Camera
17318 NA-G7X housing for Canon PowerShot G7X Camera
17319 NA-7DMKII housing for Canon 7D MarkII Camera
17320 NA-5DSR for Canon EOS 5DS/5DS R/5DMKIII Camera
17323 NA-80D Housing for Canon 80D Camera
17324 NA-G7X MKII Housing
17325 NA-5DIV Housing for Canon EOS 5D Mark IV Camera 
17326 NA-EOS M5 Housing for Canon EOS M5 Camera
17327 NA-6DII housing for Canon 6D Mark II camera
17328 NA-EOS M50 Housing for Canon EOS M50 Camera 
17329 NA-EOS R housing for Canon R Camera
17413 NA-RX100III Housing
17415 NA-RX100IV Housing
17416 NA-A6300 Housing for Sony A6300 Camera 
17417 NA-A6500 Housing for Sony A6500 Camera
17418 NA-RX100V housing for Sony Cyber-shot DSC-RX100 V Digital Camera 
17419 NA-A9 Housing for Sony A9 Camera
17420 NA-A7RIII Housing
17421 NA-RX100VI Housing for Sony DSC-RX100 VI Digital Camera
17710 NA-LX100 Housing
17711 NA-GX8 housing for Panasonic Lumix GX8 camera
17712 NA-GX85 Housing
17714 NA-LX10 Housing
17715 NA-G9 Housing for Panasonic Lumix G9 Camera
17716 NA-GX9 Housing
17717 NA-LX100II Housing
17718 NA-S1R Housing for Panasonic S1R Camera
17810 NA-EM10II Housing 
17813 NA-EM10III Housing
17902 Ninja2 Housing with HDMI bulkhead and cables
17904 Nauticam Atomos Shogun housing with HDMI input
17905 Nauticam Atomos Shogun housing 
17906 NA502H Housing for Small HD 502 monitor
17907 NA-502S Housing for Small HD 502 5-inch HD monitor with SDI input support
17908 NA-FHD5 Housing for Sony CLM-FHD5 Full HD Monitor
17909 Nauticam Atomos Flame Housing (with HDMI input) 
17910 Nauticam Atomos Flame Housing
17920 NA-502B-H Housing
17921 NA-502B-S Housing
28102 Moisture alarm
17418P NA-RX100V Pro Package (Inc. felxitray, right handle, two mounting balls, M14 vacuum valve, shutter exten
17421P NA-RX100VI Pro Package
17714P NA-LX10 Pro Package

 

 

After set up, the meaning of the LED indicator in the housing:

LED indicator Status
Flashing “Blue” light Standby mode. The moisture alarm is active, and the system is ready for vacuum indication whenever a vacuum is detected.
Flashing “Red” light with beeping sound Moisture is detected.
Flashing “Yellow” light Some vacuum is detected, target vacuum level is not reached.
Steady “Green” light Target vacuum level is reached.
Rapidly flashing “Yellow” light Vacuum is dropping. (Will occur only after target vacuum level is reached)
Rapidly flashing “Red” light Vacuum is totally lost. Circuit stalled until switched off. (Will occur only after target vacuum level is reached)

TECHNICAL SPECIFICATIONS 

Depth Rating: 150m

SUPPORT & DOWNLOADS

Instruction Manual