Nauticam 7" G7 HD UltraBright Underwater Monitor
HDMI 1.4 and 2K SDI input (cables sold separately)
The Nauticam 7" G7 is a self-contained underwater monitor built for professional video and stills — an exceptionally bright 3000-nit 7" display with up to six hours of battery life and a full suite of monitoring tools. It connects to a supported camera or cine housing via Nauticam's HDMI/SDI bulkhead system and comes with a swivel-and-tilt mount.
Consider the G7 monitor if you:
- Need maximum brightness — a 3000-nit screen readable even in direct sunlight near the surface
- Want a large 7" monitor with long battery life for extended dives
- Shoot via 4K HDMI or 2K SDI and want SDI output to a surface monitor
- Want professional tools — focus peaking, false colour, waveform, vector scope, zebra and more
At a Glance
| SKU | 16611 |
| Dimensions | 204 × 150 × 67 mm (W × H × D) |
| Brightness | 3000 nit |
| Resolution | 1920 × 1200 |
| Input formats | 4K30 via HDMI; 2K60 via SDI |
| Signal support | HDMI in, SDI in and SDI out (no HDMI-to-SDI cross conversion) |
| Run time | Up to 6h at backlight level 5 (4× NL2160HP 6000mAh) |
| Weight in air | 2.5 kg (incl. swivel & tilt mount) |
| Weight in water | Negative 0.83 kg (incl. swivel & tilt mount) |
| Depth Rating | 100 m |
The Monitor
Brightness, clarity and tools
The G7 delivers a 3000-nit, 1920 × 1200 display that stays clear and vibrant even in direct sunlight, with image-control tools at your fingertips: anamorphic de-squeeze, customisable aspect ratios, false colour, focus assist, focus peaking, histogram, image flip, vector scope, waveform and zebra.
Inputs and outputs
The G7 supports 4K HDMI and 2K SDI inputs as well as SDI output for feeding a surface monitor. Note that HDMI-to-SDI cross conversion is not supported on this model.
Power and mounting
Power comes from four Nitecore NL2160/2160HP (6000mAh) or NL2153/2153HP (5300mAh) batteries (not included; the Nitecore UMS4 four-slot charger is recommended), giving up to six hours at backlight level 5. The included Swivel and Tilt Adjustable Monitor Mount System attaches to the camera or cine housing with two 1/4"-20 UNC screws and adjusts smoothly to any angle.
What's in the Box
- Nauticam 7" G7 HD UltraBright Monitor
- Monitor hood
- Swivel and Tilt Adjustable Monitor Mount System (attaches with 2× 1/4"-20 UNC screws)
- Spare O-ring for battery door, O-ring remover and lubricant
- Padded travel case
(Batteries and charger not included.)
Optional Accessories
HDMI 1.4 connection
- 25033 Standard HDMI bulkhead with M16 thread
- 25081 M24-M16 step-down adaptor (required for certain cameras)
- 25100 HDMI (D-A) 1.4 cable, 200mm (HDMI bulkhead to camera; NA-a1/FX3/GH6)
- 25047 HDMI (D-D) 1.4 cable, 800mm (between HDMI bulkheads)
SDI input
- 25058 M16 SDI bulkhead
- 25060 SDI cable, 0.4m (camera to underside of SDI bulkhead)
- 25061 SDI cable, 0.75m (between SDI bulkheads)
SDI output
Resources
- G7 Monitor PDF Manual — link TBC (published on Nauticam's page; direct link to be confirmed)
Self-contained underwater monitor — no camera, lens/port or flash system applies, and no vacuum valve (the battery door is sealed with its own O-ring). HDMI/SDI cables sold separately.
