To install the vacuum valve first remove the plug of the M16 accessory port from the housing. Next, Remove the cap from the vacuum valve. Check that the O-ring is in place where the vacuum valve comes in contact with the housing. Lastly, tighten the vacuum valve to the housing with the tool provided.
| Depth Rating | 150m |
Nauticam
Allows for the use of both a vacuum valve and another M16 accessory such as a strobe-triggering bulkhead. Includes Vacuum Valve II (with pushbutton release) and cap. Install to the...
Nauticam
M14 Vacuum Valve II Pushbutton Release To install the vacuum valve first remove the plug of the M14 accessory port from the housing. Next, Remove the cap from the vacuum valve. Check that the O-ring...
Nauticam
Allows for the use of both a vacuum valve and another M14 accessory such as a strobe-triggering bulkhead. Includes Vacuum Valve II (with pushbutton release) and cap. Install to the Housing Remove...
Nauticam
Vacuum Valve Cap for 25624/25625/25626/25627 A spare screw-on cap for the Nauticam vacuum valves 25624, 25625, 25626 and 25627. It protects the valve and its O-ring between dives and keeps the valve...
Nauticam
M16 Dual Activation Vacuum Valve (compatible with low pressure inflator hose quick disconnect)
