RED® KOMODO-X™ Housing for RED® KOMODO-X™
For the RED® KOMODO-X™
The RED® KOMODO-X™ camera features a 6K Super 35 sensor with up to 16 stops of dynamic range. R3D files (REDCODE RAW) can be recorded directly to CFast 2.0 cards, eliminating the need for expensive proprietary media. It also features Canon's new RF mount with full support of the Canon EF to EOS R lens adaptor allowing a wide variety of focal lengths to be used. The RED® KOMODO-X™ is second in size only to the RED KOMODO allowing it to have one of the smallest form factors of the RED Digital Cinema Lineup. The feature set is clearly aimed at those requiring professional-level specs in a travel-friendly package, which accurately describes the majority of underwater filmmakers.
Why this housing
The Nauticam RED® KOMODO-X™ Housing
The Nauticam RED® KOMODO-X™ housing is engineered in a similar fashion to previous RED KOMODO housing, providing the most compact and travel-friendly system possible. Komodo-X offers seamless integration with DSLR lenses and the same N120 port system used in Nauticam DSLR and Cinema systems. Enjoy unmatched user-friendly setup and intuitive operation including tool-less setup and tear down in minutes. Batteries can be swapped without ever removing the camera from the housing, and lens changes can be accomplished in seconds.
Lens Support
The RED® KOMODO-X™ is compatible with RED RF-PL adaptors and includes a locking RF mount to give you extra piece of mind. The Nauticam RED® KOMODO-X™ housing offers full support of the Canon EF to EOS R Adaptor along with the Canon EF to EOS R Adaptor with Variable ND Filter. The left side of the housing features an easily accessible command wheel for smooth ND changes. Regardless of EF or RF lens selection, changing lenses is quick, easy, and doesn't require any tools. Not being limited to using DSLR lenses is crucial for cinema systems and the Nauticam RED® KOMODO-X™ housing, when used with the 16410 N120 to N200 Port Adapter can support the use of Cinema Lenses and the associated N200 Port System.
Ethernet Remote Control
While the RED® KOMODO-X™ housing is engineered to allow for full control by the operator, it also supports an ethernet surface feed in 5m (pole cam) and 45m (studio) lengths. Within the housing, there is space to install a small ethernet router which would allow for full control of the camera at the surface through the RedControl App.
Vacuum Check and Leak Detection System
The Nauticam RED® KOMODO-X™ housing features Nauticam's field-tested Vacuum Check and Leak Detection System that provides constant updates on the water-tight and safe-to-dive status of the housing. By drawing a slight vacuum inside the housing using a reliable and compact manual hand pump, the system is able to ensure water-tightness before entering the water as well as throughout the dive. A simple color-coded LED lighting system, easily visible at the rear of the housing lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature.
What's in the Box
- RED® KOMODO-X™ Housing
- 25625 M16 Vacuum Valve II (Pre-installed)
- 90120 Housing O-ring, lubricant, O-ring remover
- 2x Handles with mounting balls
- CR2032 Battery (for moisture alarm and vacuum system)
- Allen Wrench Set
- Housing Skids
- Wheeled Case with Custom foam insert
- 2x 0.25Kg Trim Weights
- 2x 0.5Kg Trim Weights
Recommended Accessories
- 17959 Housing Mounting Ball with 1/4'' Screws
- 16701 Top Handle for E2/F/C70/BMPCC/KOMODO
- 25221 M10 Strobe Mounting Ball for Housing
- 16232 0.25kg Trim Weights for 16227
- 16233 0.5kg Trim Weights for 16227
HDMI Output — Monitor & Recorder Options
Monitor housing & mounting
- 25058 M16 SDI Bulkhead
- 25060 SDI Cable in 0.3m Length
- 16261 Ethernet Surface Cable Set in 45m length
- 16262 Replacement of Housing Lemo Bulkhead with Integrated Ethernet Cable
- 16263 Ethernet Surface Cable Set in 5-meter length
Ports, Gears & Extensions
Every lens needs the matching port, extension ring and gear. Select yours from the official Nauticam port chart for this camera.
