Nauticam NA-ZR Housing for Nikon ZR Camera
For the Nikon ZR
The NA-ZR underwater housing upholds Nauticam’s dedication to innovation. Essential controls are conveniently accessible via ergonomic handles, facilitating an efficient setup that optimizes time spent in the water and minimizes time spent on rig maintenance. The N120 port system accommodates Nikon Z Mount lens with a new gear system. Nauticam’s extensive range of ports and in-house corrective optics complement the NA-ZR’s capabilities. When equipped with an accessory vacuum valve, the integrated vacuum check and leak detection system provides continuous updates on the housing’s watertight integrity. A vacuum system reset switch, located beneath the tray, eliminates the necessity to open the back of the housing during lens or port changes. The NA-ZR supports additional mounting with a built in 1/4-20 cheese plate.
At a Glance
| Dimensions | 338mm(W) x 200mm(H) x 125mm(D) |
| Weight in air | TBA |
| Buoyancy in Water | TBA |
| Depth Rating | 100m |
| Port Mount | N120 |
Why this housing
NA-ZR Housing
The NA-ZR underwater housing upholds Nauticam’s dedication to innovation. Essential controls are conveniently accessible via ergonomic handles, facilitating an efficient setup that optimizes time spent in the water and minimizes time spent on rig maintenance. The N120 port system accommodates Nikon Z Mount lens with a new gear system. Nauticam’s extensive range of ports and in-house corrective optics complement the NA-ZR’s capabilities. When equipped with an accessory vacuum valve, the integrated vacuum check and leak detection system provides continuous updates on the housing’s watertight integrity. A vacuum system reset switch, located beneath the tray, eliminates the necessity to open the back of the housing during lens or port changes. The NA-ZR supports additional mounting with a built in 1/4-20 cheese plate.
Nikon F-Mount & Z-Mount Lens Support
The Nauticam NA-ZR is designed to accommodate Z-Mount lenses. With the compact design of the NA-ZR housing, there are newly released zoom and focus gears. There is also the 22225 N120 FTZ Adapter ER 25 with Knob which will allow you to manual focus Z-Mount lenses and their corresponding gears. For complete compatibility details, you can view the NA-ZR Port Chart.
Premium Professional Optics
Nauticam’s professional water-contact optics deliver the highest underwater image quality. The FCP, WACP, and WWL lines enhance wide-angle, while the MFO and SMC offer exceptional macro and super macro capabilities. The EMWL allows you to shoot macro, wide-angle, or combine the styles for unique images.
Mission Control
In true Nauticam fashion, essential controls are placed as close to the handles as possible, making these housings the most intuitive and user-friendly available. Our engineers strategically position controls where they’re needed most, rather than simply near the corresponding buttons on the camera. Dials feature rubberized finger grooves, and levers are designed for smooth operation.
Integrated Vacuum Check & Leak Detection Electronics
The Nauticam vacuum check and leak detection system is shipped with NA-ZR as standard equipment. Combined with an accessory vacuum valve (PN 25625), this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur. The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.
Flash Triggering
Flash triggering on the Nikon ZR in the NA-ZR is available via either optical or electrical trigging. Electrical triggering uses the 25013 M14 Nikonos 5-Pin bulkhead with hotshoe connection.
What's in the Box
- NA-ZR Housing
- 2x handles with mounting balls and handle brackets
- Housing Cap
- 2x plugs for Optical fiber cable mount
- Panasonic CR-2032 Battery (pre-installed for moisture alarm)
- Spare main O-ring, O-ring remover and lubricant
- Set of Allen Keys
- Padded housing bag and shoulder strap
Recommended Accessories
- 25218 Mounting Ball Set for Tripod
- 25221 M10 strobe mounting ball for housing
- 25224 M10 strobe mounting ball for housing (with hole for using lanyard)
- 25228 M5 strobe mounting ball for housing
- 25625 M16 Vacuum Valve II (Pushbutton Release)
- 25413 27cm lanyard with 2 snap hooks
- 25013 M14 Nikonos 5-Pin bulkhead with hotshoe connection
- 22225 N120 FTZ Adaptor ER 25 with Knob
- 26325 USB-C Bulkhead with USB-C Connector
HDMI Output — Monitor & Recorder Options
HDMI cable systems
- 25086 M24 adaptor for HDMI 2.0 cable
- 25077 M24D1R205-M28A1R170 HDMI 2.0 Cable
- 25033 Standard HDMI bulkhead with M16 thread
- 26326 M24-M16 Adaptor for use with 26325 *instead of existing 25081
- 25076 HDMI (D-D) Cable in 200mm Length for NA-XT2/XH1/A6400
Monitor housing & mounting
- 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (excl. HDMI 2.0 cable)
- 17922S Nauticam Atomos Ninja V-S Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (excl. HDMI 2.0 cable) with Atomos AtomX SDI Module
- 16611 Nauticam 7'' G7 UW ULTRAHD Monitor (4K HDMI, 2K SDI input, excl. cables)
- 16612 Nauticam 7'' T7 UW ULTRAHD Monitor (HDMI 1.4 input, excl. cables)
- 25047 HDMI (D-D) cable in 800mm length (for connection between HDMI bulkheads) *Required for use with 16612 monitor housing
- 17927 NA-Shinobi II Housing for Atomos Shinobi II 5.2" Monitor with HDMI 1.4 input
- 25082 HDMI 1.4 Cable for Ninja V housing in 0.75m Length
- 17951 Nauticam Atomos Shogun housing mounting system
- 17952 Nauticam Monitor Housing Mounting Adaptor
- 17954 Tripod plate for NA-A7S and NA-GH4
- 17960 Universal Quadra-Pod Plate for Nauticam Housings
- 17961 Swivel and Tilt Adjustable Monitor Mount System
- 25218 Mounting Ball Set for Tripod
Water-Contact & Wet Optics
- 81202 Super Macro Convertor 2 (4x Magnification)
- 81203 Super Macro Convertor 3 (2.3x Magnification)
- 81301 Compact Macro Convertor 1 (CMC-1, 4.5x Magnification)
- 81302 Compact Macro Convertor 2 (CMC-2, 2.8X Magnification)
- 81501 Mid-range Focus Optimizer 1
- 81503 Mid-range Focus Optimizer 3
- 83202 Wet Wide Lens 1B (WWL-1B) 130 deg. FOV with compatible 28mm lenses
- 83203 Wet Wide Lens Compact (WWL-C) 130 Deg. FOV with Compatible 24mm Lenses
- 85204 Wide Angle Conversion Port - 2 (WACP-2) 140 Deg. FOV with Compatible 14mm Lenses
- 85205 N100 0.36x Wide Angle Conversion Port Compact (WACP-C)
- 85206 N120/N100 0.36x Wide Angle Conversion Port with Integrated Float Collar and Interchangeable Port Mounting Ring (WACP-1B)
- 85207 N120/N100 Fisheye Conversion Port with Integrated Float Collar (FCP) 170 Deg. FOV with Compatible 28mm Lenses
- 87302 EMWL Set #2
- 87202 EMWL Focusing Unit #2
- 87211 EMWL 150mm Relay Lens
- 87212 EMWL Angled Relay Lens
- 87221 EMWL 60° Objective Lens
- 87222 EMWL 100° Objective Lens
- 87223 EMWL 130° Objective Lens
- 87226 EMWL 160° Objective Lens
- 25101 M67 flip diopter holder for M67 macro ports
- 25108 M67 Double Flip Holder for M67 Macro Ports
- 83250 M67 to Bayonet Converter II
- 83214 Bayonet Mount Adaptor for SMC/CMC
- 87501 Flip Holder for EMWL
- 87512 Shade for 130° Objective Lens
- 87513 Shade for 100° Objective Lens
- 87519 Shade for 160° Objective Lens
- 87518 Strobe Mounting Brackets for EMWL Relay Lens
Ports, Gears & Extensions
Every lens needs the matching port, extension ring and gear. Select yours from the official Nauticam port chart for this camera.
