Skip to main content

17337 NA-R5C Housing for Canon EOS R5 C Camera

Nauticam

$ AUD9,900.00 (Inc. GST)
$ AUD9,000.00 (Ex. GST)
Write a Review
SKU:
17337
Weight:
4.30 KGS
Adding to cart… The item has been added

NA-R5C Housing for Canon EOS R5 C Camera

For the Canon EOS R5 C

The NA-R5C underwater housing follows suit with Nauticam's drive for innovation. To support both the legacy and native lenses, Nauticam has integrated the NA-R5C into the N120 port system. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple.


At a Glance

Dimensions366mm x 232mm x 180mm (W x H x D)
Depth Rating100m
Weight in air4.3kg
Weight in water0.3kg (includes camera, LP-E6N battery and 20,000 mAh power bank)
Port OpeningN120 Cinema

Why this housing

The Nauticam NA-R5C Underwater Housing for the Canon EOS R5 C Camera

The NA-R5C underwater housing follows suit with Nauticam's drive for innovation. To support both the legacy and native lenses, Nauticam has integrated the NA-R5C into the N120 port system. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple.

Mission Control

Nauticam engineers are obsessed with getting the underwater image maker unfettered access to all the necessary controls, with as many within easy reach of the ergonomic rubberized handles. This Mission Control philosophy extends to the NA-R5 C where a dual thumb lever and dual sub-lever are placed by the right handle.

External Battery Pack

To support 8K 60p internal Canon Cinema RAW Light recording, an external power source is required. At the bottom of the housing is space to accomodate a USB-C power bank.

Flash Triggering

Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (PN 26301) or a TTL Flash Trigger (PN 26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes.

Integrated Vacuum Check and Leak Detection System

The Nauticam vacuum check and leak detection electronics are shipped with the NA-R5C as standard equipment. Combined with an optional accessory 25625 M16 Vacuum Valve II this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing.


What's in the Box

  • NA-R5C Housing
  • 90134 Housing O-ring, lubricant, o-ring remover
  • 2x Optical bulkhead caps
  • 2x Handles with mounting balls
  • Charging USB-C (Male/Female) cable adaptor (USB cable is excluded)
  • CR2032 Battery (for moisture alarm and vacuum system)
  • Allen Wrench Set
  • USB-C Male to Female elbow adaptor
  • Housing carry bag and shoulder strap

Recommended Accessories

  • 25624 M14 Vacuum Valve II (Pushbutton Release)
  • 25625 M16 Vacuum Valve II (Pushbutton Release)
  • 32211 Nauticam Full Frame Straight Viewfinder 32°/ 1:1
  • 32212 Nauticam Full Frame Straight Viewfinder 40°/ 0.8:1
  • 32213 Nauticam Full Frame Angle Viewinder 32°/ 1:1
  • 32214 Nauticam Full Frame Angle Viewinder 40°/ 0.8:1
  • 32201 Nauticam 180˚ straight viewfinder
  • 32203 Nauticam 45˚ viewfinder
  • 26301 Manual Flash Trigger for Canon
  • 28130 Hand Strap for 28113
  • 26216 Universal Optical Fiber Cable
  • 25081 M24-M16 Step Down Adaptor
  • 25020 M14 Nikonos 5-pin bulkhead with Canon hotshoe connection
  • 16703 Control Kit for NA-R5C to use with Drop-In Filter Mount Adapter EF-EOS R
  • 16701 Top Handle for E2/F/C70/BGH1/Komodo
  • 25221 M10 strobe mounting ball for housing
  • 17959 Housing Mounting ball with 1/4'' screws
  • 25218 Mounting Ball Set for Tripod
  • 17951 Nauticam Monitor Housing Mounting System
  • 17954 Universal Tripod Plate for Nauticam Housings
  • 17957 Nauticam Monitor Housing Mounting Adaptor
  • 17960 Universal Quadra-Pod Plate for Nauticam Housings

HDMI Output — Monitor & Recorder Options

HDMI cable systems

  • 25086 M24 adaptor for HDMI 2.0 Cable
  • 25077 M24D1R205-M28A1R170 HDMI 2.0 Cable
  • 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4Kp60 4:2:2 10-bit Reorder/Monitor/Player (excl. HDMI 2.0 cable)
  • 17922S Nauticam Atomos Ninja V-S Housing with Atomos AtomX SDI Module
  • 25033 Standard HDMI Cable with M16 Thread
  • 25081 M24-M16 Step Down Adaptor
  • 25076 HDMI (D-D) Cable in 200mm Length for NA-XT2/NA-XH1/NA-A6400
  • 17920 NA-502B-H Housing for SmallHD 502 Bright Monitor
  • 17923 NA-Shinobi-H Housing for Atomos Shinobi 5.2" 4K HDMI Monitor with HDMI 1.4 input

Ports, Gears & Extensions

Every lens needs the matching port, extension ring and gear. Select yours from the official Nauticam port chart for this camera.


Resources