Nauticam NA-R6V Underwater Housing for Canon EOS R6V

Full control of the Canon EOS R6V behind a depth-rated seal

The NA-R6V is Nauticam's underwater housing for the Canon EOS R6V, machined from solid aluminium and hard-anodised against salt-water corrosion. It gives you fingertip access to the camera's key controls, features the new N120 Auto Lock Port System II, and is depth-rated to 100 m. Handles and stabilising brackets come pre-installed, so it's ready to build into your system out of the box.

Consider this if:

• you shoot the Canon EOS R6V and want a rugged, ergonomic underwater housing
• you want the latest N120 RF Mount II port system with auto-lock
• you value a neutral-buoyancy rig that's easy to handle underwater

At a glance

Key features

• N120 Auto Lock Port System II (international patent pending)
• Dual-function lens control knob for zoom and focus, switched by the lever below (patent pending)
• MIL handles with rotary housing lock
• AF-ON lever on the rear right, Playback lever on the rear left
• Moisture alarm and leak-detection system

Please note: flash trigger / X-Sync for stills is not supported on this housing.

Lens compatibility

Canon RF lenses using the RF Lens Gear System II (part numbers 19630–19648). Check the N120 RF Mount II port chart for your specific lens.

What's in the box

• NA-R6V housing
• Housing cap
• 2× handles with mounting balls and 2× handle brackets
• Panasonic CR-2032 battery (pre-installed for moisture alarm)
• Spare main O-ring (90137), O-ring remover and lubricant
• Set of Allen keys
• Padded housing bag and shoulder strap

Recommended accessories

Housing mounts

• 17959 Housing Mounting Ball with 1/4'' screws
• 25221 M10 strobe mounting ball for housing
• 25224 M10 strobe mounting ball (with lanyard hole)
• 25218 Mounting Ball Set for Tripod
• 25228 M5 strobe mounting ball for housing

Vacuum valve

• 25625 M16 Vacuum Valve II (Pushbutton Release)

Lanyard

• 25413 27cm lanyard with 2 snap hooks

USB-PD power bank

• 26325 USB-C Bulkhead with USB-C Connector
• 26326 M24-M16 Adaptor for use with 26325

HDMI 2.0 output

• 25086 M24 adaptor for HDMI 2.0 cable
• 25099 M24A2R200-M28A1R170 HDMI 2.0 Cable

HDMI 1.4 output

• 25033 Standard HDMI bulkhead with M16 thread
• 25100 HDMI (D-A) 1.4 Cable 200mm
• 25075 HDMI (D-A) Cable 190mm

Monitor & recorder housings

• 16613 Atomos Ninja TX Housing
• 17922 Atomos Ninja V Housing
• 17922S Atomos Ninja V-S Housing (with SDI module)
• 16611 7'' G7 UW UltraHD Monitor (4K HDMI, 2K SDI)
• 16612 7'' T7 UW UltraHD Monitor (HDMI 1.4)
• 17927 NA-Shinobi II Housing
• 25047 HDMI (D-D) cable 800mm (required for 16611/16612)

Monitor mounting

• 17951 Atomos Shogun housing mounting system
• 17954 Tripod plate
• 17957 Monitor Housing Mounting Adaptor
• 17960 Universal Quadra-Pod Plate
• 17961 Swivel & Tilt Adjustable Monitor Mount

Wet lenses — macro

• 81202 Super Macro Converter 2 (SMC-2, 4×)
• 81203 Super Macro Converter 3 (SMC-3, 2.3×)
• 81301 Compact Macro Converter 1 (CMC-1, 4.5×)
• 81302 Compact Macro Converter 2 (CMC-2, 2.8×)
• 81501 Mid-range Focus Optimizer 1 (MFO-1)
• 81503 Mid-range Focus Optimizer 3 (MFO-3)

Wet lenses — wide angle

• 83202 Wet Wide Lens 1B (WWL-1B) 130°
• 83203 Wet Wide Lens Compact (WWL-C) 130°
• 85204 Wide Angle Conversion Port 2 (WACP-2) 140°
• 85205 N100 WACP-C 0.36×
• 85206 WACP-1B 0.36× (N120/N100)
• 85207 Fisheye Conversion Port (FCP) 170°

Wet lenses — macro to wide (EMWL)

• 86201 Macro to Wide Angle Lens 1 (MWL-1) 150°
• 87303 EMWL Set #3 (Canon RF 100mm)
• 87203 EMWL Focusing Unit #3
• 87211 EMWL 150mm Relay Lens
• 87212 EMWL Angled Relay Lens
• 87221 EMWL 60° Objective Lens
• 87222 EMWL 100° Objective Lens
• 87223 EMWL 130° Objective Lens
• 87226 EMWL 160° Objective Lens

Wet-lens mounting accessories

• 25101 M67 flip diopter holder
• 25108 M67 Double Flip Holder
• 83250 M67 to Bayonet Converter II
• 83251 M77 to Bayonet Converter II
• 83214 Bayonet Mount Adaptor for SMC/CMC
• 86221 M67 Flip holder for MWL-1
• 86222 Double Flip Holder for MWL-1
• 87501 Flip Holder for EMWL
• 87512 Shade for 130° Objective Lens
• 87513 Shade for 100° Objective Lens

Buoyancy — carbon-fibre float arms

• 72261 Ø70×200mm Float Arm (370g)
• 72262 Ø70×250mm Float Arm (520g)
• 72263 Ø70×300mm Float Arm (670g)
• 72264 Ø90×170mm Float Arm (450g)
• 72265 Ø90×220mm Float Arm (720g)
• 72266 Ø50×200mm Float Arm (160g)
• 72267 Ø50×250mm Float Arm (240g)
• 72268 Ø50×300mm Float Arm (320g)
• 72233 Single Bayonet Holder II (Ø70)
• 72234 Double Bayonet Holder II (Ø70)
• 72243 Single Bayonet Holder II (Ø90)
• 72244 Double Bayonet Holder II (Ø90)

Resources

• Refer to the Nauticam N120 RF Mount II Port Chart for lens, port and extension compatibility.